Yamaha Tenere 700 Top luggage rack

Export price.

Before ordering, please check Shipping Info page.
Instructions - HERE.


Compatibility - fits all Yamaha Tenere 700 bikes.

Doesn't fit with any pannier racks except Outback Motortek pannier rack! 

Fits with Perun moto Yamaha Tenere 700 Side carriers


  • Very low profile - top rack sits low, close to the tail plastics and at the same angle as the stock seat;
  • Twenty slots - strapping points for all kind of soft luggage, tool bags or roll bags, slots for perfect mounting of Mosko moto Reckless 80 or Giant loop Siskiyou rack-less bags,
  • Strong and durable - side rails are made of stainless steel, top plate is milled out of 6 mm aluminum alloy.
  • Adequate top surface - approx. 294 (W) x 256 (L) mm of completely flat top surface, perfect for 10-20 liter soft bags,
  • Strap-friendly -  chamfered, smooth edges - even on stainless steel side rails,
  • Lightweight - less than 1.5 kg, including all mounting hardware,
  • Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - for rider only (no pillion) -road only use, 5 kg max; won't work with seats higher than stock.
  • SW-motech top case ready - pre-drilled holes for SW-Motech adapter kit (not included check instructions for details)  - for rider only (no pillion) - road only use, 5 kg max; won't work with seats higher than stock.
  • Rotopax ready - pre-drilled holes for 1 gallon Rotopax mount (mount not included), for 1 gallon Rotopax fuel or water can,
  • Kriega OS-Rack Loops ready - pre-drilled holes for Kriega OS-rack loops, for perfect mounting of Kriega bags, 
  • All necessary hardware provided - high quality 10.9 zinc coated bolts and powder coated spacers,
  • High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
  • Outback Motortek pannier rack compatible - check HERE for details. 


Design details explained - HERE


For even better fitment of rack-less bags, check our Yamaha Tenere 700 Side carriers - HERE.

Kriega Tenere 700 OS-base on Tenere 700 World Raid with Perun moto Top Luggage rack - HERE


Perun moto products on Tenere 700 World Raid - HERE


Rack with Kriega US-Drypack bags - HERE

Rack with SW-Motech 38l top case - HERE

Rack with Givi 46l top case - HERE

Customer Reviews
4.9 Based on 51 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
98reviewers would recommend this product Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    Jesse D.
    United States United States
    I recommend this product

    Top Notch Product!

    Excellent overall. Great machining, finish, attention to detail top notch. I actually used this with some Dirt Racks soft pannier racks. Used a slightly different spacer and they are perfect. The best quality and sized rack for the T-7 I found. Price was affordable and shipping was fast to the USA.

    Scott A.
    United States United States
    I recommend this product

    Exactly what I’d been looking for

    I’d been looking at a lot of different racks for my T7 and PerunMoto’s was the goldilocks rack. Big enough for my needs but not too big. Plenty of the down options and givi compatibility make it perfect. Well made, fast shipping and a good price. Perfect.

    Brad S.
    United States United States

    T7 Top luggage rack

    Great fit and finish on the luggage rack. Would have preferred a more 'square' platform for what I carry, but that is just me. Sturdy mounting and no wiggle or flex when loaded. Nice Work!

    Dustin N.
    United States United States
    I recommend this product

    Great quality rack, not so great fasteners

    This rack is a great quality part and I'm very happy with the fit and finish. The fasteners thar came with it seem to be mismatched, where I would assume 4 of them would be the same length, they weren't, and also only 2 washers. There were also no instructions, so maybe there's a reason I'm unaware of. For this price point I would also expect stainless steel fasteners. Still, the rack is really nice and I'd buy it again.


    Perun moto

    Hi Dustin! Thank you for your review, I am glad you like the rack. All large (M8 bolts) should be the same length and there should be four washers. We do our best to double check all the hardware packs, but some mistakes happen. If you contacted us, we would solve that. We don't use stainless steel bolts, as 10.9 zinc coated bolts are much stronger and for this use, they need to be strong. Instructions are online, just scan the QR code on the package and on the hardware pack. Or here is the link - Cheers! Nikola

    Andres G.
    Colombia Colombia
    I recommend this product

    Excelent product for Yamaha Tenere for offroad use.

    Excellent product for Yamaha Tenere for offroad use due to its low weight and the possibility of putting soft cases.