Great thing with this harness is that it is made specifically for Tenere 700 (including World Raid), so positioning of the bags is perfect. Properly set, it hugs the bike very well and it is very secure. It rests on the side plastics almost entirely and even the largest bags (OS-18 Adventure packs) are away from the silencer.
T700 specific OS-base is designed to work without any racks, so the rear straps form a closed loop. Kriega supplies special T700 mounts which are bolted to the bike, as shown in the Kriega's instructions, and rear straps just loop over those. This works great if there is no rack installed on the bike. But if the rear top rack is installed, a problem occurs, as most rear top racks, including Perun moto's rack, are installed using the same threaded holes as Kriega's special T700 mounts. Workaround is mounting the Kriega's special T700 mounts on top of the rear rack's side brackets, using a longer bolt. But the problem is that the bolt will be too long, which will lead to a big leverage. Bolt could bend under the load.
Main difference between Perun moto and Kriega mounts is in the way they are bolted to the bike - our mount has recessed hole for allen head bolt, so it uses much shorter bolt - M8x55. For added strength, we supply very strong 12.9 bolt. Also, our mount is a bit shorter, as it is supposed to mount on top of side brackets holding the rear rack.