• Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

  • March 09, 2022 2 min read 0 Comments

    We designed our Yamaha Tenere 700 Top luggage rack as a platform for rack-less luggage systems.

    To further improve the fit of these systems on the Tenere 700 we designed Yamaha Tenere 700 Side carriers.


    1. Stand-offs for rack-less systems

    These Side carriers are designed to support side pockets of most popular rack-less systems on the market. Doing this, they ensure these luggage systems will fit perfectly. 

    Side carriers extend approx. 80 mm to the rear, which gives more room for fine-tuning the position of rack-less bags. 

    Tenere 700 is notorious for it's fragile plastics. Side carriers are almost completely supporting the weight of the bags. Only small part of the bags is still pushing against the side plastics. 

    More details about fitment of some of the most popular rack-less bags can be found in the following blog posts:

    Mosko moto Reckless 80,

    Giant Loop Great Basin,

    Giant Loop Siskiyou,

    Enduristan Blizzard XL


    2. Integration with Perun moto Top luggage rack 

    As seen in the blog posts above, Side carriers can seamlessly integrate with Perun moto Yamaha Tenere 700 Top luggage rack.

    Once installed, it takes only few minutes to remove them, and re-install. 

    More details can be found in the Instructions

    Due to the mounting system, Side carriers can't be used with top racks from different manufacturers. 


    3. Low profile

    To ensure the rack-less bags are sitting as close to the bike as possible, Side carriers have a very low profile. 

    Same low profile is kept when Side carriers are used with the Top luggage rack.


    4. Strength and durability

    Side carriers are made of 4 mm stainless steel. This provides a balance between strength and light weight. 

    All edges are nicely chamfered and bends are made using the special tooling. 

    Also, bends are precisely calculated, to allow some movement of the Side carriers without touching the plastics. 

    In order to make Side carriers strong enough, we designed an under-the-tail billet aluminum bracket. 

    The bracket greatly improves the strength of the assembly.


    This is a niche product. If you are struggling to make your rack-less bags fit perfectly, try our Yamaha Tenere 700 Side carriers. With Yamaha Tenere 700 Top luggage rack and Tie-down brackets it will make your life with rack-less bags much easier and it will provide that perfect fit.