You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu
You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns

March 26, 2021 1 min read 4 Comments
Slots on our KTM 790/890 Billet rack - Small are perfectly positioned for Mosko moto Reckless 40 and Reckless 80 straps. Positioning of the bags is easy and rounded edges of the slots are gentle and won't cut the straps even on extended RTW trips.
Here is how Mosko moto Reckless 40 v2 fits.







And here is how my favorite all-round performer, Reckless 80, fits. For photo purposes, without center bag and "beaver tail".







Note that although bags are just barely touching the silencer, use of Heat shield is still necessary!
November 30, 2025
Hey there. Does the small rack for the 890 work with the Mosko Gnoblin?
July 27, 2025
Hi Adrian. I just looked trough the archives and couldn’t find the photos. Take a look at tie-down brackets product page to give you a better idea how they look and fit on the bike:
https://www.perunmoto.com/collections/ktm-790-adventure-r/products/ktm-790-890-tie-down-brackets
As for the heat shield, we used the one which came with Mosko Reckless 80.
July 27, 2025
Can you show a photo of the front mounting straps and the silencer heat shield without the bags installed.
Comments will be approved before showing up.
Gliga - Perun moto
November 30, 2025
Hey Andre
Mounting the Gnoblin will require a bit of DIY. As is, there is not enough room between the rack and tail plastics. You will need to add four spacers (10mm or so, a stack of flat washers will work just fine) to raise the rack, where it threads into the tail of the bike. Longer bolts will have to replace the original ones.
Underside of the three holes where the Gnoblin can be mounted is countersunk so you will need to use a large flat washer to cover it. See the cover photo of the article linked below to get a better idea of what I’m talking about.
https://www.perunmoto.com/blogs/blog/ktm-790-890-billet-rack-small-some-design-details