by Nikola Maletić July 31, 2017 1 min read

Recently, customer had an accident on his Husqvarna 701 Enduro while he was performing a wheelie. Luckily, he was OK (except some missing skin, but he is healing well). Also, bike wasn't damaged too much and it is already repaired. 

But Perun moto Husqvarna 701 Enduro Luggage rack suffered some damage, and it is not repairable.

What is interesting is that even rack suffered very strong direct hit, it didn't broke, it just bent. Also, threaded inserts molded into plastic tank were completely OK and bolts held well. 

This was unfortunate event and I hope we won't see something like this again, but it served as a good test of rack's strength and strength of tank inserts. It also proves that thread engagement of the bolts we use is more than adequate for the purpose. 

Nikola Maletić
Nikola Maletić



Also in Perun moto blog

KTM 1090/1290 Side rack - Rotopax/Tooltube/Tool roll bracket
KTM 1090/1290 Side rack - Rotopax/Tooltube/Tool roll bracket

by Nikola Maletić February 15, 2019 1 min read 0 Comments

Our new project - small side plate - platform for Tool tube, Rotopax or waterproof Tool roll.
Read More
KTM Adventure 1090 R vs custom built Messner moto Honda CB750 cafe racer
KTM Adventure 1090 R vs custom built Messner moto Honda CB750 cafe racer

by Nikola Maletić January 19, 2019 1 min read 0 Comments

Recently we had a guest in our workshop. So we took an opportunity to take some photo shots of two very different bikes together - our KTM 1090 Adventure R and custom built Messner moto Honda CB 750 cafe racer.
Read More
GPS (Montana) bracket for KTM 1090 Adventure R
GPS (Montana) bracket for KTM 1090 Adventure R

by Nikola Maletić January 14, 2019 4 min read 0 Comments

After extensive off road riding last season, I had mixed feelings about mount I used for my Garmin Montana. So I started thinking how to make my own GPS mount for 1090 Adventure R. This is what I came up with. 
Read More