by Nikola Maletić April 23, 2016 1 min read

Few months ago I modified Perun moto KTM 690 Enduro Luggage rack SD to fit on KTM 450 Rally Replica, for fellow rider from Austria. Bolt pattern on 450 RR tank is same as bolt pattern on KTM 690 Enduro R. Angle is also same. But 450 Rally Replica has tail light on top of rear fairing. That required cutting piece of lower bracket of the rack, to make room for tail light. 

Still there is little clearance, but it should be fine, since this rack will be used only to carry small stuff, like Kriega US-5 Drypack and as strapping point for rack-less saddlebags.

And bike...is a dream bike. 

And rack blends in nicely.

Nikola Maletić
Nikola Maletić



Also in Perun moto blog

KTM 1090/1290 Side rack - Rotopax/Tooltube/Tool roll bracket
KTM 1090/1290 Side rack - Rotopax/Tooltube/Tool roll bracket

by Nikola Maletić February 15, 2019 1 min read 0 Comments

Our new project - small side plate - platform for Tool tube, Rotopax or waterproof Tool roll.
Read More
KTM Adventure 1090 R vs custom built Messner moto Honda CB750 cafe racer
KTM Adventure 1090 R vs custom built Messner moto Honda CB750 cafe racer

by Nikola Maletić January 19, 2019 1 min read 0 Comments

Recently we had a guest in our workshop. So we took an opportunity to take some photo shots of two very different bikes together - our KTM 1090 Adventure R and custom built Messner moto Honda CB 750 cafe racer.
Read More
GPS (Montana) bracket for KTM 1090 Adventure R
GPS (Montana) bracket for KTM 1090 Adventure R

by Nikola Maletić January 14, 2019 4 min read 0 Comments

After extensive off road riding last season, I had mixed feelings about mount I used for my Garmin Montana. So I started thinking how to make my own GPS mount for 1090 Adventure R. This is what I came up with. 
Read More