Perun moto KTM 390 Adventure R or X / Enduro Heel Guards - Installation Instructions
Content of the kit
- 2 x Heel guard (LHS and RHS)
- 4 x M8x20 buttonhead TX bolt
- 4 x M8 flat washer
- 4 x M8 safety nut
---
Step-by-step video instructions.
Coming soon
---
I Installation of the Heel guards
Required tools:
- 6mm Allen key
- TX-40
1. Undo the two bolts marked below and remove the OEM passenger foot rest bracket. Make sure the threaded holes are clear of debris.
2. Attach the heel guards using provided small washers and bolts. Loctite 243 can be used.
3. Torque bolts to 10-15 Nm.
4. Repeat the process on the other side of the bike.
