You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu---

AWAY NOTICE - we will be out of office from June 22nd till July 4th. No packages will be shipped in this period. ---

    0

    Your Cart is Empty

    Perun moto KTM 1290 (2021+) Grab handles removal kit - Installation Instructions

    Contents of the kit

    4 x spacer 20/8.2-13

    Instructions

    1. Unbolt four bolts and remove OEM luggage rack plate. 

    2. Make sure that plastic cover is in place. Place four spacers above the holes.

    3. Install the rack back on, using same bolts. 

    4. Tighten the bolts, in alternating pattern. Torque to 20 Nm.

    5. After first few hundred kilometers with rack installed, check the bolts and re-tighten if needed.