Perun moto BMW R1300GS Gnoblin Mount- Installation Instructions

This Gnoblin mount is designed for BMW R1300GS. It fits only to Small OEM top rack / grab handles (OEM part number 46725A75D68).

Content of the kit:

• 1 x Gnoblin mount top plate

• 4 x M4x12 stainless steel buttonhead bolts

• 4 x M4 stainless steel flat washers

Required tools:

• TX20 Torx wrench/bit

• 2.5mm Allan wrench/bit

Installation

1. Remove the plastic cover from OEM small grab handles by removing the four bolts on the underside.

2. Place the Gnoblin mount top plate into position and make sure it's seated properly.

3. Use four provided M4x12 buttonhead bolts and M4 washers to secure everything in place. Add a drop of mild thread locker to all the bolts as an extra precaution. Do not overtighten!

4. Depending on luggage type and your preferences, install the Mosko moto Gnoblin in one of the two positions.

5. After few rides check the bolts and retighten if needed.