You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu

Menu
0

You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu

0

Your Cart is Empty

Add description, images, menus and links to your mega menu

A column with no settings can be used as a spacer

Link to your collections, sales and even external links

Add up to five columns

  • Add description, images, menus and links to your mega menu

  • A column with no settings can be used as a spacer

  • Link to your collections, sales and even external links

  • Add up to five columns

    • Perun moto BMW F900GS Tie-down brackets - Installation Instructions

    These Tie-down brackets are designed for BMW F900GS.

    Content of the kit

    • 2 x Tie-down bracket 

    • 4 x M8 washer - small

    • 4 x M8x20 buttonhead bolt

    Perun moto BMW F900GS Tie-down brackets Installation - 1

    Installation

    1. Remove stock passenger foot peg brackets, by removing two bolts on each side. 

    Perun moto BMW F900GS Tie-down brackets Installation - 2

    2. Use provided M8 bolts and flat washers to install Perun moto tie-down brackets. Torque to 10-12 Nm.

    Perun moto BMW F900GS Tie-down brackets Installation - 3

    Brackets can face front or rear of the bike, depending on your needs. 

    Perun moto BMW F900GS Tie-down brackets Installation - 6

    Perun moto BMW F900GS Tie-down brackets Installation - 4

    or

    Perun moto BMW F900GS Tie-down brackets Installation - 5

    3. After few rides check the bolts and re-torque to the spec if needed.