Perun moto BMW F900GS Footstand Enlarger - Installation Instructions

This Footstand enlarger is designed for BMW F900GS.

Content of the kit

• 1 x Footstand Enlarger upper plate (stainless steel) 

• 1 x Footstand Enlarger lower plate (billet aluminum)

• 6 x M5x10 stainless steel buttonhead torx bolts

Installation

1. Use paddock stand or similar to support the bike in upright position.

2. Place the billet lower plate on the underside of OEM footstand. It's a snug fit and it is not possible to install it in wrong orientation.

3. Place the stainless steel upper plate on top. OEM footstand is sandwiched between upper and lower plate. Perun moto logo should face toward front of the bike.

4. Use six provided M5x10 buttonhead bolts to secure everything in place. Add a drop of thread locker to all the bolts.

Upper plate is thin and flexible. This enables it to conform to OEM footstand's shape as the bolts are tightened.

5. Lower the footstand and let the bike rest on it. Check if everything aligns as intended.

6. After few rides check the bolts and retighten if needed.