Honda CRF1000L Africa Twin Luggage rack - Installation Instructions

In order to reinforce OEM plastic luggage rack carrier, we strongly suggest using Givi SR1144 Kit - just lower bracket from that kit. Givi did a good job here and we didn't want to "invent hot water" again and make our own reinforcement kit. Perun moto supplies two set of bolts - one to be used if Perun moto rack is installed without Givi kit and another one to be installed if Givi kit is used with Perun moto rack. 

 A. Installation with GIVI SR1144 Kit

1. Install lower piece of Givi reinforcement kit. Follow instructions provided by Givi, pictures A and B. Skip picture C. 

2. Place provided spacers (R18/H14).

3. Install Perun moto Honda CRF1000L Africa Twin Luggage rack, using M8x60 countersunk bolts, washers and safety nuts. 

 4. Tighten everything, do not exceed 15 Nm.

  A. Installation without GIVI SR1144 Kit

1. Place provided spacers (R18/H14).

2. Install Perun moto Honda CRF1000L Africa Twin Luggage rack, using M8x40 countersunk bolts, washers and safety nuts. 

 3. Tighten everything, do not exceed 15 Nm.