Perun moto blog
How to bolt Rotopax mount from above
Recently fellow rider from Portugal sent me an e-mail explaining how he modified Rotopax mount so he can bolt it to the Luggage rack from above.
Read More
Perun moto Extension plate and US turn signals issue
Recently I made new Extension plate for KTM 690 Enduro Luggage rack SD. One of the features is bent side flanges. Since turn signals on US models are mounted higher there are some clearance issues, which will be corrected in next batch.
Read More
Altrider Hemisphere Saddlebags and Perun moto Heel guards on 'Balkan trophy' reconnaissance ride
Our Italian friend Michele from Tuttoenduro just finished single man reconnaissance trip through Balkans.
He rode his KTM 690 Enduro R, modified to endure rides like this one. Michele use Perun moto KTM 690 Enduro Heel guards to secure Altrider Hemisphere Saddlebag. This luggage retup proved to be very durable.
Giant Loop Coyote and Perun moto Luggage rack and Heel guards
David from New Zealand helped me to design Perun moto KTM 690 Heel Guards. He is using those and Perun moto KTM 690 Enduro Luggage rack with Giant Loop Coyote saddle bag.
Read More
Aftermarket brake pedal for KTM 690 Enduro R
OEM brake pedal is made of relatively soft aluminum. In case of direct impact, pedal bends easily. So, I decided to replace the OEM brake pedal with much stronger aftermarket pedal.
Read More
Aftermarket shorty clutch and brake levers for KTM 690 Enduro
OEM clutch and brake levers on KTM 690 Enduro are high quality Brembo and Magura levers. But both too long for my liking. Luckily, there are few aftermarket solutions out there.
Read More
Adjusting the steering stops on KTM 690 Enduro
On fresh-from-the dealer bikes steering stops are very limiting. It is on of the first things owners should adjust.
Read More
How to remove air box on 2014-2018 KTM 690 Enduro - photo instructions
In order to take proper care of your KTM 690 Enduro it is advisable to learn how to remove and install air box. Bike on the photos is 2016 KTM 690 Enduro R, but procedure is almost the same on all 690's.
Read More
Drilling rear fender on KTM 690 Enduro - installation of handrails or racks
New KTM 690 Enduro's are delivered without holes on the rear plastic fender. In order to mount handrails, luggage rack or pannier rack, some drilling is required. No special tools are needed, just standard tools, drill and 15 or 16 mm wood drill bit.
New Perun moto Add-on plates - work in progress
"Old" Perun moto Add-on plates proved its worth during almost two years of production. For more than a year, I am working on new Add-on plates, and work is almost over.
General idea is to make add-on plate that will be bolted onto pannier racks. Pannier racks are (usually) made as carriers for hard cases and don't provide enough support for soft luggage. Also, there is a lot of unused space in that area. Add-on plate can be useful in may ways - as a support for soft luggage, as platform for Rotopax fuel can, as a place to store large tools used rarely (wrench, tyre irons etc.), as a place to mount Tool tube...
New Perun moto bike - 2016 KTM 690 Enduro R
Time has come for new bike. "Old" 2008. KTM 690 Enduro happily went to new owner to make room for successor - 2016. KTM 690 Enduro R.
Read More
Tuttoenduro KTM 690 on Verona bike show
2016th Motor Bike Expo was held in Verona, on January 22nd, 23rd and 24th. Like every year, it was packed with interesting bikes, girls and events.
For me, highlight of the event was bike owned by Michele Gas of Tuttoenduro. Bike was exhibited on Mas Moto stand. It is one of most exiting KTM 690's I have ever seen - fully farkled and prepared for tough rides. Among many aftermarket parts are Perun moto KTM 690 Enduro Luggage rack SD and Heel Guards.