February 06, 2018 1 min read

Perun moto KTM 690 Enduro Luggage rack has pre-drilled holes for Rotopax mount. Since threaded holes on Rotopax mounts are on the bottom of the mount, Perun moto rack has to be loosened up or removed so Rotopax mount can be bolted to the rack. For riders that are mounting and dismounting Rotopax mount often, this can be annoying. 

Recently our friend David shared few photos showing how he solved the problem, following example of fellow rider from Portugal. He countersunk holes on top of Rotopax mount, for M6 countersunk bolts. 

Then he used steel 12.9 M6x70 countersunk bolts to bolt Rotopax mount from above.

He used washers and safety nut. 

This way it's much easier to remove and install Rotopax mount and there is no need to loosen or remove Perun moto rack before it, since there is enough space below the rack to place washers and nut. 

David, thanks for photos!

Nikola Maletić
Nikola Maletić



Also in Perun moto blog

"Broken Roads To Siberia" - documentary film
"Broken Roads To Siberia" - documentary film

July 14, 2019 1 min read 0 Comments

"Broken Roads to Siberia" is an adventure motorcycle documentary film about two friends from Finland, who ride their motorcycles to the infamous Vitim bridge in the far out Siberia.
Read More
Blasphemy? Top case on KTM 690 Enduro R
Blasphemy? Top case on KTM 690 Enduro R

July 04, 2019 1 min read 0 Comments

Not pleasing to an eye, but it can be very convenient in the city. SW-Motech 38 ltr. top case on 2019 KTM 690 Enduro R with our Luggage rack and Extension plate.
Read More
Mosko moto Reckless 80 and Extension plate for 2019 KTM 690 Enduro
Mosko moto Reckless 80 and Extension plate for 2019 KTM 690 Enduro

July 04, 2019 1 min read 0 Comments

Mosko moto Reckless 80 is my favorite large rack-less bag. It fits on 2019 KTM 690 Enduro very well, even better if it's equipped with our new Extension plate.
Read More