You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu
You are currently browsing Perun moto international store. If you are from the EU, please visit www.perunmoto.eu
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
December 17, 2024 2 min read
Kriega US-10 Drypack is perfectly sized as a day bag. It has enough room to pack basic tools, spare tube, some snacks and thinner rain gear. A great option for those who want to avoid carrying all the stuff in a backpack. Once mounted on the Husqvarna 701, it's easy to forget it is there.
To make installation as simple as possible, we have designed our Husqvarna 701 Luggage rack with pre-drilled holes for Kriega OS-Rack loops. It's possible to mount the US-10 bag either by using four OS-Rack loops, as shown in the photo below, or by using only two OS-Rack loops - shown later in this article.
OS-Rack loops mount on the underside of our rack. To make the upper surface completely flush, we're using countersunk M6 bolts (these have to be sourced separately, they are not standard part of Kriega OS-Rack loops). There is no need to overtighten these bolts, Hypalon loops should rotate freely. To prevent OS-Rack loops from falling off (happens usually when riding without a bag installed), use a flat washer and M6 nylock nut on the underside. Or, if this will be your permanent setup, add a drop of mild thread lock to all the bolts.
With four OS-Rack loops installed, the Kriega US-10 bag can be mounted either lengthwise, as shown in these photos, or across the seat. Either option works well. Just note that if the bag is mounted lengthwise, fuel cap will be partially blocked.
To prevent the bag from moving back-fort, pass the top strap trough slot on the rack.
As previously mentioned, Kriega US-10 can also be installed by using just two OS-Rack loops. Those are mounted in the rear of Perun moto Luggage rack. To secure front end of the bag, pass the short loops on the underside of the bag trough slots on sides of the rack, then use G-hook straps to tighten everything in place.
In this short video, you can see the fit and installation of the US-10 Drypack on Husqvarna 701.
Following photos are showing the Kriega US-10 Drypack installed on Perun moto Husqvarna 701 Luggage rack from different angles.
Comments will be approved before showing up.