Perun moto Yamaha Tenere 700 Side Carriers Gen2 - Installation Instructions
Content of the kit
- 2 x Side Carrier (LHS and RHS)
- 4 x M8x60 countersunk bolt
- 4 x M8 countersunk 3D washer
---
Step-by-step video instructions.
---
A. Installation of the Perun Moto Side Carriers Gen2 for Yamaha Tenere 700
Note: Gen 2 Side Carriers are not a standalone product. They work only with our Gen2 Top luggage rack (GP-00051 - current model).
1. Remove the two bolts from the side of our rack, marked with red. Make sure the spacers remain in place.
2. Place the LHS Side Carrier on the outside of the rack. Use M8x60 countersunk bolts and countersunk 3D washers to secure it. Tighten by hand for now.
3. Once everything lines up, tighten the M8 bolts to 15Nm.
4. Repeat the process on the other side.
5. After few rides, re-torque the bolts to the spec if needed.