Perun moto EU - shipped from within eu
Perun moto EU - shipped from within eu
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns

November 16, 2026 2 min read
In one of our previous ARTICLES we had a good look at the fitment and mounting options of the large Kriega US-40 on a Yamaha Tenere 700. This time, we're looking at the other end of the size spectrum to see how compact Kriega US-10 Drypack works on this great bike.
Ten liters of capacity makes this bag a good choice for day trips. Pack rain gear, first aid kit, basic tools and a spare tube so you don't have to carry them in the backpack. US-10 is small enough to be practically unnoticeable on the bike.
Unlike the US-40 which uses G-hook straps looped directly through slots on our rack to be secured, the US-10 Drypack requires Kriega OS-Rack Loops to be bolted onto the rack first. We have the option of bolting them to the underside of the rack so the top side remains completely flat.

This is good because there's nothing to rub against the bag's bottom, helping to extend its lifespan. And, as can be seen in the photo above, if the bag is not mounted the OS-Rack loops remain barely noticeable.
It takes a couple of minutes to bolt the OS-Rack loops and it's a one-time job. Just remember to use a drop of mild thread locking agent or a safety nut on the underside to prevent them from loosening. I prefer using the safety nuts.

To connect the US-10, G-hooks are secured to the OS-Rack Loops while buckles on the other end clip into the buckles on the bag itself.



After tightening the straps and securing their loose ends, the bag is firmly secured and ready for action.

The US-10 can be used on its own, as shown here, or combined with the Kriega OS-Base and OS-12/OS-18 bags to add some extra storage. Since the OS-Base sits entirely on the rear seat, it doesn't interfere with the rack or the US-10 mounting points, so the mounting process remains exactly the same.
I've found the US-10 to be a practical little bag for day rides. It's unobtrusive on the bike, provides enough room for the essentials, and works just as well when the weather turns bad or the trail gets rough. It's a simple way to carry a few extra items without having to use a larger bag.

Comments will be approved before showing up.